How to Reset BrosTrend WiFi Extender to Factory Default Settings?

Are you unable to log in to your BrosTrend WiFi extender? Is the extender not delivering sufficient WiFi performance? Do you want your BrosTrend device to flaunt the factory settings once again? Well, all these questions have the same answer – reset BrosTrend WiFi extender to default settings.

What will BrosTrend WiFi Extender Reset Do?

The reset process is a gateway to get rid of more than 90% of extender-related issues. If you choose to reset your BrosTrend WiFi extender, it will start working on the factory default settings. The factory default settings are those settings that come configured from the manufacturer’s side. The following are the default settings on which your extender will run as soon as you reset it:

• Default IP address: 192.168.0.254 (re.brostrend.com can be used as its alternative)
• Default SSID: BrosTrend_EXT
• Admin Password: None (It is assigned by you at the time of the setup process)
• WiFi Password: None

Warning: Since the reset process will erase every customized setting from your BrosTrend WiFi range extender, you will have to set it up once again from scratch.

How to Reset BrosTrend WiFi Extender?

The following steps will help you restore your BrosTrend WiFi range extender to the default factory settings:

• Ensure that your BrosTrend device is connected to a working power outlet.
• Observe the PWR LED and check if it is solid blue.
• The next step is to press the Reset button.
• You must press the button using a needle and release it after a few seconds.
• All LED lights (SIGNAL, WPS, and PWR) will flash once simultaneously.
• The PWR light status will return to solid blue once again.
• Your BrosTrend WiFi extender is reset to the factory default settings successfully.

In this manner, you can reset the BrosTrend WiFi extender to the factory settings. The next task is to perform BrosTrend WiFi extender setup once again. You can do this with the help of the WPS method or using the extender’s web GUI.

Fixed: Can’t Reset BrosTrend WiFi Extender

There are chances that you won’t be able to restore your BrosTrend device to the default factory settings. In that case, you are recommended to take the aid of the tips given below:

• Do not plug your extender into a damaged socket while you are trying to reset it.
• There are chances that you did not press the Reset button for the correct interval. Know that you have to release the button once all the LED lights present on the BrosTrend extender flash once and that at the same time.
• May be you are not using a sharp object like needle to press the extender’s Reset button. Thus, mend your mistake and see if you are able to reset your WiFi range extender.

Note: A lot of people mistake reset process as reboot. This is to inform you that rebooting just involves powering down of the extender and switching it on after a while. It does not affect any setting of the BrosTrend device. However, resetting erases every setting of the extender and make it work like a brand new device.

The Conclusion

That’s all about how to reset BrosTrend WiFi extender to factory default settings. We are hopeful that after taking the help of the instructions mentioned in this post, you will be able to reset the extender successfully.