
How to Reset BrosTrend AX3000?
Do you have BrosTrend AX3000 range extender which is facing multiple technical errors and you want to reset it to resolve the problem. Remember, the process will wipe out all the data stored inside the device memory. But also, it will fix the error.
Here, you will find the correct instructions to reset the BrosTrend AX3000 extender.
How to Reset the BrosTrend AX3000?
There are two ways to reset the BrosTrend AX3000: the physical reset button method and the web interface method. I’ll cover both, but let’s start with the simplest one.
Method 1: Using the Reset Button
This is the go-to option if your router is being totally unresponsive or if you can’t access the web interface.
- Find the reset button
Look at the back or bottom of your BrosTrend AX3000. You’ll see a tiny hole labeled “Reset.” It’s usually recessed to prevent accidental presses. - Grab something pointy
You’ll need a paperclip, pin, or even a SIM ejector tool basically anything small enough to fit into that hole. - Press and hold
Push the button down and hold it for about 10-15 seconds. You’ll see the router lights start to flash. That’s your cue it’s resetting. - Wait for reboot
Let go of the button and give it a couple of minutes. The router will restart and revert to its original factory settings.
Method 2: Reset via Web Interface
This method is great if your router is still functioning and you can access the admin panel through your browser.
- Connect to the router
Use Wi-Fi or an Ethernet cable to connect your device to the BrosTrend AX3000. - Open your browser
In the address bar, type re.brostrend.com or 192.168.0.254 and hit Enter. - Log in to the admin panel
Default username and password is usually admin/admin unless you’ve changed it (and hopefully you have). - Find the reset option
Navigate to System Tools or Administration (the name may vary slightly), then look for “Factory Default” or “Reset”. - Confirm the reset
Click it, confirm your choice, and let the router do its thing.
After the reset, the BrosTrend AX3000 will restart, and you’ll need to set it up from scratch. That includes choosing a network name (SSID) and password, and reconfiguring any settings you had before.
What to Do After the Reset?
Once your router has been reset, it’s essentially brand new. Here’s what you should do next:
- Reconnect to the default network
Look for the default SSID on the sticker on your router. Use the password provided (also on the sticker) to connect. - Access the setup wizard
When you connect, your browser might automatically open the setup page. If not, type in re.brostrend.com again. - Set a strong password
Please don’t use “12345678” or “password” you’re better than that. Create a solid password that keeps your network secure. - Update firmware
If you haven’t checked in a while, it’s a good idea to update your router’s firmware. It can fix bugs and improve performance.
Troubleshooting Tips
If the reset didn’t work or the router is still misbehaving, try the following:
- Double-check the reset duration
If you didn’t hold the button long enough (a quick press won’t do it), the reset won’t trigger. Make sure you’re holding it down for a full 10–15 seconds. - Try a different power outlet
Yes, it sounds silly, but sometimes power issues mess with the router’s behavior. - Use a different browser or device to access the setup page if it’s not loading.
Still stuck? BrosTrend has support don’t be afraid to reach out. Our team is usually pretty responsive via email or chat.
The Summary
Here, in this article, you have learned about how to reset the BrosTrend extender with AX3000 extender and resolve the issues.
FAQs
How to Reboot the BrosTrend Extender?
Press the power button on the BrosTrend WiFi range extender twice. You can also reboot the device by plugging the device out of the wall outlet and plug it in again.
Where to Relocate the WiFi Range Extender?
You should place/plug it on a socket which is situated on the halfway from the router and dead zones of your house. It should be inside the range of the host router.
How to Reset the WiFi Range Extender?
Navigate the reset button on your EX6200v2 (usually a small hole). Use a paperclip to press and hold it for 10–15 seconds. Wait until the LEDs stabilize. Reconnect to the default extender network and visit mywifiext.net to set it up again from scratch.