How to Reset and Regain Password on BrosTrend AX3000?

The process of reset a device will clear all data and settings which has been set by the user. Same in the BrosTrend AX3000 range extender device, resetting will clear all the settings, not just the settings, it will wipe the bugs and glitches as well.

Here, we provide simple instructions to reset the BrosTrend device, but first why you should reset it. So, let’s dive in.

Why Resetting the BrosTrend If Password is Forgotten?

If you’ve forgotten the password and can’t log into your BrosTrend extender, there is only one way to regain the password, just reset the device.

Here’s what a reset does moreover:

• Clears ALL saved settings (admin username, password, Wi-Fi names, custom Ips).
• Disconnects it from any routers it was previously paired with.
• Makes it act like its brand new, straight out of the box.

Now, let’s reset the BrosTrend AX3000 WiFi range extender, reconfigure, and change the password.

How to Reset the BrosTrend AX3000 Extender?

There are simple and short steps to reset the AX3000 WiFi extender, those instructions are given below:

• Locate the reset button – it’s usually a tiny pinhole on the side or back of the extender.
• Grab a paperclip, SIM ejector, toothpick — anything pointy and non-metallic works.
• Press and hold the reset button for about 10-15 seconds until the LED starts blinking rapidly.
• Release it. Wait about 30-60 seconds for it to reboot.

Then, you must reconfigure the BrosTrend with the help of the re brostrend com interface on your computer.

How to Reconfigure the BrosTrend AX3000 Range Extender?

Find a power outlet near your main router. Plug the extender in and give it 30–60 seconds until the Power LED is solid blue. On your phone or laptop, open the Wi-Fi list and connect to the extender’s network. There’s no password at this point. Just connect.

• Launch Chrome, Safari, Edge. In the address bar, punch in: re.brostrend.com or 192.168.0.254
• Hit enter. You should land on the BrosTrend setup dashboard. If it doesn’t load, try clearing cache or switching browsers.
• First-time setup might ask you to create a login password for security. Set something you’ll remember this isn’t your Wi-Fi password, it’s just for extender access.
• The extender will now scan for nearby networks. You’ll see a list pick your home Wi-Fi (both 2.4GHz and 5GHz if available).
• Enter your Wi-Fi password exactly. After entering credentials, the extender will configure itself. It’ll take about 60-90 seconds.
• The extender might reboot that’s normal. Wait until the LEDs stabilize. Solid blue = good. Blinking red = something went sideways.
• Now, check your Wi-Fi list again: Connect to whichever makes sense (based on your device or room). Use the same password as your main Wi-Fi.

How to Change the BrosTrend AX3000 Extender WiFi Password?

Launch Chrome, Safari, Edge. In the address bar, punch in: re.brostrend.com or 192.168.0.254 and search it. You should land on the BrosTrend setup dashboard.

• Now go into the wireless settings of the dashboard.
• Here choose the SSID option and enter the new password.
• Click SAVE button and your password has been changed.

Now, you can use this new password to connect the extended network.

The Last Words

After the reset, network devices work great like when they are new and fast. But your managed settings will be wiped out. These settings can be re-adjusted in minutes from the setup re brostrend com window on computer.

FAQs