
How to Link Brostrend Extender to Orbi RBK352
To link your BrosTrend extender to the Orbi RBK352 system, you’ll need to connect to the extender’s network, access its setup page, and then select your Orbi’s WiFi to complete the pairing. This whole process typically takes less than 10 minutes — when it works right.
But mixing two different brands like BrosTrend and Orbi can trouble even the most tech-savvy users. One minute, everything looks fine, and the next, your extender won’t be able to find the Orbi signal or keeps disconnecting for no clear reason. Sound familiar?
If you’re stuck in that loop — dropped connections, flashing LEDs, setup pages not loading — it’s fixable. This guide walks you through each step clearly, so you can get your extender working smoothly with your Orbi RBK352 easily. Let’s fix it together.
Why You Need This Setup
The Orbi RBK352 is a strong mesh system, no doubt. But sometimes even a great mesh system leaves dead zones—like that one room upstairs or out in the backyard where your signal starts to fade. That’s where this device extender comes in.
When linked properly, your extender can pick up the existing Orbi signal and rebroadcast it, giving you better WiFi in areas where the Orbi alone may struggle. Whether you’re working remotely, streaming content, or just trying to scroll without interruption, this setup gives your home network the extra boost it needs.
Step-by-Step: Linking the device to Orbi RBK352
Let’s get into it! Here’s how to link your extender to the Orbi RBK352 mesh router. Follow the exact steps given below:
1. Plug in and Power Up the Extender
Start by plugging your extender into a wall outlet halfway between your Orbi router and the area with poor WiFi. Make sure it’s in the same room during setup to avoid signal issues.
Wait for the power LED on the extender to turn solid blue indicating it’s ready.
2. Use the WPS Method First
The fastest way to connect extender to the Orbi RBK352 is through WPS:
- Press the WPS button on the Orbi router. You’ll see its WPS LED start blinking.
- Within 2 minutes, press the WPS button on your extender.
- Wait for the extender’s LED to turn solid blue or green (depending on model). This indicates a successful connection.
If the light turns red or keeps blinking, don’t panic. You can still use the web-based method.
3. Setup Through URL (If WPS Fails)
Sometimes, the WPS connection doesn’t work. If that’s your case, go for the manual method:
- On your computer or phone, connect to the Brostrend WiFi (should look something like “Brostrend_EXT”).
- Open a browser and type re.brostrend.com into the address bar. Tap Enter.
- The setup page will open. Choose “Repeater Mode.”
- It will scan for nearby WiFi networks. Select your Orbi RBK352’s SSID (WiFi name).
- Enter your Orbi WiFi password when prompted.
- Follow the on-screen steps to finalize the setup.
Once it finishes, the extender will reboot. After about 60 seconds, it will start broadcasting your extended network (e.g., “Orbi_EXT”).
4. Place the Extender carefully
Once the connection is stable, unplug the extender and move it to a better spot—somewhere between your Orbi RBK352 and the weak zone you’re trying to fix. Keep it away from thick walls, microwaves, or metal surfaces that could block the signal.
Check the LED on the extender. Blue or green? The connection is strong and stable. Red or blinking? Move it closer to the Orbi.
5. Test the Connection
Now reconnect your devices (laptop, phone, etc.) to the extended network. Browse a bit, run a speed test, stream a video.
If everything feels smooth and fast, congratulations—you’ve just successfully linked your extender to your Orbi RBK352.
Troubleshooting Tips
- If you can’t access re.brostrend.com, try using the IP address: “192.168.0.254” in your browser.
- Still no connection? Factory reset the extender by holding the reset pinhole for 10 seconds, then start fresh.
- Always double-check that you’re using the correct Orbi password—many connection failures come from simple typing errors.
Conclusion
Setting up your extender with the Orbi RBK352 might feel like a hassle at first, but once it’s done, you’ll notice a massive improvement in your WiFi reach. Whether you use the WPS method or the re.brostrend.com setup page, the key is to be patient and follow the steps carefully.
This setup gives your existing mesh system a real upgrade without needing to buy more expensive nodes or gear. Now, that lag in the guest room or garage is gone, and your connection is finally what it should be—strong, stable, and everywhere you need it.
FAQs
Can I use with other Orbi models too?
Yes, these extenders work with most Orbi systems, not just the RBK352. As long as your router supports WPS or standard WiFi, you’re good.