How to Link BrosTrend Extender to Deco Mesh Router?

Deco mesh system is one of the best mesh nodes in the world. There are total of three devices in a Deco mesh system. Now, the question has been arisen ‘can extender connects to the Deco mesh router’.
The answer is YES. Here, you will get to learn about how to link BrosTrend extender to Deco mesh router. The first thing you need to do is check the settings using the Deco app in your phone and then start the extender connection.

Check Deco Settings

• Open the Deco app in your phone and use the admin username and password to access it. Select the Deco router node.
• Check all settings of it, with which it is connects, network is working well and deco node is fully functional.
• If needed, user can reboot the Deco node for once. It is just an easy process, turn off and turn off the device. Press the power button twice.

Now, it is time to connect the BrosTrend WiFi extender to Deco mesh router. All instructions are given on these sections given below.

Link BrosTrend Extender to Deco

Start with powering up the extender by plugging it directly in the electric wall socket. It should be in the reach of the router. Use the WPS (Wi-Fi Protected Setup) method. All instructions are given:

• Power on the extender and router within each other reach.
• Press the WPS button on the router and within 2 minutes press it on the extender.
• The devices will connect with each other in a few minutes.
• Then, you can start to configure the extender with recommended settings.

Access Interface and Finish Setup

You need a computer or laptop connected to the BrosTrend extender network. Use the extender Ethernet port to link your laptop to the network. Then follow steps:

• After connection, open the web browser in your computer.
• Type the URL re-brostrend.com or IP address 192.168.0.254 in the bar.
• Search it by pressing the ENTER button and reach to the login interface.
• Enter the admin username and password and click on the LOGIN button on the screen.
• You will get access to the interface dashboard. Here set the settings and adjust the networks. Now, the BrosTrend setup has completed.

End Thoughts

At the end of the article post, we have reached at the conclusion that you can link BrosTrend extender to Deco mesh router. Here, we have provided all instructions of the setup and check the settings.