How to Connect Brostrend Extender to Linksys Router?

Searching for Brostrend extender setup instructions? Then you have come to the right place. This blog help you to connect Brostrend extender to Linksys router at home. Here we provide steps by step guide to the Brostrend WiFi extender setup. Let’s start without wasting time.

Physically Setup

It is very important to correctly install the extender physically. If you are setting up the first time, then you need to follow every step carefully:

To begin, unpack the extender, you will find an extender and a Ethernet cable inside the package.

• To begin, unpack the extender, you will find an extender and a Ethernet cable inside the package.
• Use the Ethernet cable to attach the extender to the router, and give power to both devices.
• After that, you need to configure the extender via web manager.
• But if you are using WPS button to connect the extender, then you don’t need to configure the router via browser.

Configure via WPS Button

If the router supported WPS button, then you are use the WPS button to connect Brostrend extender to Linksys router. Steps are:

• Temporary place the extender along with the router.
• Find and push the WPS button of the router first.
• And after few seconds press the WPS button of the extender.
• A light is starting blink on the Brostrend extender.
• Here you need to wait till the light is turn into solid color.

Then move the extender to a location where the router’s signal cannot reach. In this method extender inherit all the custom settings of the router.

Through Web Manager

Sometime the router does not support the WPS button; in this case, you will need to connect an Ethernet cable to connect Brostrend extender to Linksys router. Steps are:

• First of all attach the computer with router via cable or wirelessly./li>
• Then you need to use the browser to reach out the 192.168.0.254 interface.
• Type this IP address into the search bar of the browser.
• Enter login detail and reach out the web interface of the Brostrend extender.
• Then select the network name or SSID of the router which you want to extender and also provide their password.

This way, you can configure the Brostrend router with help of web browser. On this interface, you can also manage several settings of the extender.

Conclusion

I hope this guide was helpful to connect Brostrend extender to Linksys router. Here we provide the easy steps to setup. If you have any doubt, then contact to our customer support.