BrosTrend WiFi Extender No Internet – Troubleshooting Guide
A BrosTrend WiFi range extender takes the router signals and amplifies them for improved speed and coverage. But, if the WiFi extender is not connecting to internet, the online experience is horrible. Go through this post and learn what to do to fix the BrosTrend WiFi extender no internet issue.
(Reasons) BrosTrend WiFi Extender No Internet
The troubleshooting process begins right with the discussion of reasons causing the problem. Therefore, have a look at the points outlined below to find out why there is no internet connection on the BrosTrend WiFi extender.
- The distance between your BrosTrend extender and the main router is inappropriate
- Your extender is struggling with networking errors
- The power being supplied to the range extender is improper/unstable
- Your extender is working on a dated firmware version
Keeping the above given points in mind, let’s move straightforward to the troubleshooting tips that you should follow to get the problem resolved in a matter of minutes.
(Fixed) BrosTrend WiFi Extender No Internet
Check the Extender-Router Distance
Have a look at the gap between your BrosTrend range extender and the main router. Is it more than 10ft? If yes, then reduce this gap a little. But, be sure that this distance is not reduced to zero. At times, there are chances of signals of your WiFi devices getting clashed.
Power Cycle the BrosTrend Extender
Networking errors also called technical glitches are also the reason why the BrosTrend extender no internet issue has shown up. Thus, you are required to restart the extender. Simply, pull its plug out of the wall socket and plug it back after a few moments. This time gap will allow technical glitches to settle.
Note: If the internet connection still does not come back, then it is recommended that you grab a LAN cable and use it to link the LAN and WAN port of your router and BrosTrend extender respectively. The chosen cable should be free of cuts.
Ensure Stable Power Supply
Examine the wall socket into which you have plugged your range extender. Is it damaged? If yes, then plug in the extender to another socket that lies within the WiFi signal range of the router. If your area suffers regular power outages, we suggest you connect it to power using a UPS. This will compensate for power outages as well as surges.
Update the Firmware
Log in to your BrosTrend WiFi range extender via re.brostrend.com and see if your extender’s firmware needs to be updated. On the off-chance, a firmware update is pending, you should not wait install the latest firmware version on the router. Just do not disconnect the extender from the router during a firmware update.
Using the given tips, it is possible to fix the no internet problem with the range extender. However, you are also supposed to take care of the placement of the range extender. It is supposed to be located in an interference-free area i.e. an area where its signals are not getting distorted or obstructed.
In Conclusion
The BrosTrend WiFi Extender No Internet problem will get resolved after a careful implementation of the given techniques. But, there are chances of you getting failed even after following these tips. In that case, you should perform a factory reset of the extender using a paperclip or a pointed object. But, remember to set up the BrosTrend extender once again after that.