Brostrend-AX1500-Setup-to-Mywifiext-Not-Working
January 15, 2025 / temp

Brostrend AX1500 Setup to Mywifiext Not Working

If you are using the Brostrend AX1500 extender with Netgear extender, then you need to set up the Netgear extender in AP mode. If you are facing issues like Mywifiext not working, then read this blog. This blog solve your problem of Brostrend ax1500 setup to mywifiext not working. Let’s begin:

Enable AP Mode of Netgear Extender via Mywifiext

It is so simple to enable the AP mode of the Netgear Extender using mywifiext with this guide. Here we describe easy to use steps:

  • To begin, attach the computer device to the Netgear extender.
  • After that go to the updated web browser and type mywifiext.net into search bar.
  • Then press enter and fill the default login detail.
  • When you will comes to the dashboard of the interface.
  • Here select the AP mode instead of WiFi range extender.
  • And connect the extender with router with Ethernet cable.

This way you can setup Netgear extender in AP mode. After that you need to connect the Brostrend extender to the Netgear extender.

Connect Brostrend Extender with Netgear Extender

When you will configure the Netgear extender as an AP mode, then you can connect the extender to extender by using WPS button.

  • Temporary settle the Brostrend extender along with Netgear extender.
  • Then turn on both the extender.
  • First push the WPS button of the Netgear extender.
  • And within a 2 minutes press the WPS button of the Brostrend extender.
  • Wait till the extender shows solid light on it.
  • After that move the Brostrend extender to dead zone area.

This way you can connect the Brostrend extender to Netgear extender and after configure the extender via 192.168.0.254.  And solve Brostrend ax1500 setup to mywifiext not working. If you have any issue while accessing a mywifiext and connecting a extender to extender, then follow further given troubleshooting tips.

Troubleshooting Tips

These troubleshooting tips help you to solve Brostrend ax1500 setup to mywifiext not working. Let’s start:

  • Always use the updated version of the browser.
  • Use the correct IP address or URL and correct login detail to access the web interface.
  • Connect the Netgear extender to router with Ethernet cable.
  • Check all the devices getting proper power supply.
  • Clear all the cache and cookies of the browser.

By following these tips, you can easily access the mywifiext and connect the Brostrend extender to the Netgear extender.

Conclusion

In the above blog, you learned how to solve Brostrend ax1500 setup to mywifiext not working. If you have any query, then speak to our customer support.

Tags:

Disclaimer: We hereby disclaim ownership of any product and any association, affiliation or representation in any form, of any brand, product or service. All the information provided here has been drafted after a thorough research and regularly undergo reviews and updates.