Fix Server IP Address could not be found in Brosstrend?
If you are facing the problem of Server IP Address could not be found in Brosstrend Extender, then this is not a big problem. You can easily solve it by reading this blog. Here we provide relevant solutions that can help you solve your problem.
Reason behind server IP address could not be found
- Network Issues: The extender has the wrong network settings, or the extender is facing technical issues.
- Firewall Issues: Firewall and antivirus are creating issues during access to the Brosstrend web interface.
- Outdated Browser – Using an outdated web browser to access the server.
- DNS Configuration – Wrong DNS Configuration.
Methods to fix it
Do Basic Steps
First of all, do some basic steps to access the extender’s server with the IP address. It means you need to access the interface by using different steps given below:
- Ensure that the device is connected to the extender’s network.
- Restart the extender and try to log in.
- Use incognito browsing to access the server.
- Also use a different web browser to log in.
- Perform correct Brostrend WiFi extender setup.
Use Correct IP Address
Most of the time users don’t check the IP address, and they type the wrong IP address in the browser. Due to which the browser shows the error. So use the correct IP address, 192.168.0.254; it is mention on the label of the extender. This can solve your problem of the server IP address not being found.
Clear Cache and Cookies
Due to cache and cookies, the browser does not load the IP address; here you need to clear the cache and cookies of the browser and DNS. You can easily clear it by visiting the settings of the browser.
Temporary Block Firewall
If you have used any firewall, VPN, or any type of antivirus tool, then you don’t access the web interface of the Brostrend extender. Because this software creates issues while accessing the page. Here temporarily block the firewall and other antivirus software to solve the problem of the server IP address that could not found.
Do Power Cycle
Do the power cycle on all the network devices. Sometimes the extender faces little technical issues; you can solve it easily by doing a power cycle. To power cycle, turn off all the devices in the home network and also unplug their power and network cables. Give him a rest for a few minutes, connect all cables, and turn it on again.
Conclusion
This blog is the best guide to solve the problem of the server IP address that could not be found in the Brosstrend extender. Here we provide different solutions to solve.